Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
- 14. Brake system
   14.1. Specifications
   14.2. Pumping of hydraulic system of a drive of brakes
   14.3. Check of brake tubes and hoses
   14.4. Replacement of brake hoses
   14.5. Height of installation of a pedal of a brake
   14.6. Free wheeling of a pedal of a brake
   14.7. Distance of a pedal of a brake from a floor
   14.8. Check of the vacuum amplifier of brakes
   14.9. Parking brake
   14.10. Brake pedal
   14.11. Main brake cylinder
   14.12. Vacuum amplifier of brakes
   14.13. Replacement of forward brake shoes
   14.14. Replacement of brake shoes on back drum-type brakes
   14.15. Replacement of brake shoes on back disk brakes
   14.16. Parking brake
   14.17. Block of hydraulic management (HCU)
   14.18. Forward sensor of frequency of rotation of a wheel
   14.19. Back sensor of frequency of rotation of a wheel
   14.20. Gear rotor of the sensor of frequency of rotation of a wheel
   14.21. Repair of the working brake cylinder
   14.22. Main survey
   14.23. Check of functionality
   14.24. List of codes of malfunctions of brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


14.23. Check of functionality

GENERAL INFORMATION

Step
Visual check
Elimination method
1
Check that the control lamp of ABS burns within 2–4 seconds after ignition inclusion.
Yes
Look the following step.
No
Execute detailed check.
2
Check, whether the lamp of the parking brake is switched off at an otpuskaniye of the lever of the parking brake.
Yes
Look the following step.
No
  – check level of brake liquid.
  – check on absence of leaks brake tubes and hoses, the working brake cylinder and the main brake cylinder.
3
The diagnostic device check the codes of malfunctions written down in memory.
Yes
Execute the corresponding check.
No
Look the following step.
4
After a trip and check of the codes of malfunctions written down in memory return to a step 3.
Yes
Execute the corresponding check.
No
  – check reliability of connection of sockets.
  – system as it should be.