Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
- 14. Brake system
   14.1. Specifications
   14.2. Pumping of hydraulic system of a drive of brakes
   14.3. Check of brake tubes and hoses
   14.4. Replacement of brake hoses
   14.5. Height of installation of a pedal of a brake
   14.6. Free wheeling of a pedal of a brake
   14.7. Distance of a pedal of a brake from a floor
   14.8. Check of the vacuum amplifier of brakes
   14.9. Parking brake
   14.10. Brake pedal
   14.11. Main brake cylinder
   14.12. Vacuum amplifier of brakes
   14.13. Replacement of forward brake shoes
   14.14. Replacement of brake shoes on back drum-type brakes
   14.15. Replacement of brake shoes on back disk brakes
   14.16. Parking brake
   14.17. Block of hydraulic management (HCU)
   14.18. Forward sensor of frequency of rotation of a wheel
   14.19. Back sensor of frequency of rotation of a wheel
   14.20. Gear rotor of the sensor of frequency of rotation of a wheel
   14.21. Repair of the working brake cylinder
   14.22. Main survey
   14.23. Check of functionality
   14.24. List of codes of malfunctions of brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

14.22. Main survey

GENERAL INFORMATION

Step
Visual check
Elimination method
1
Check, whether the parking brake properly works.
Yes
Look the following step.
No
  – repair or replace the cable / lever of the parking brake.
  – check operability of the switch of the parking brake.
  – check operation of the parking brake.
2
Check level of brake liquid in a compensatory tank of brake system which should be between "Max" and "Min" labels.
Yes
Look the following step.
No
Add brake liquid.
3
Check brake tubes, hoses and their connections on absence of leaks.
Yes
If necessary, replace the corresponding details.
No
Look the following step.
4
Check properly the ABS fuse (30A):
  – break or zakorachivaniye;
  – reliability of connection.
Yes
Look the following step.
No
Replace a safety lock.
5
Check reliability of connection of components of brake system:
  – sensor of frequency of rotation of a wheel;
  – block of hydraulic management (ECU);
  – condition of a compensatory tank of brake system;
  – switch of stoplights;
  – ABS block.
Yes
Check functioning.
No
Connect a checked component.
Repair or replace a faulty component.