KIA of Sefia / Noise/range + 2. Engine + 3. Greasing system + 4. Cooling system + 5. Power supply system and release + 6. Fuel system + 7. Ignition system + 8. Coupling + 9. Mechanical transmission + 10. Automatic transmission + 11. Axes and power shafts + 12. Steering + 13. Wheels and tires - 14. Brake system 14.1. Specifications 14.2. Pumping of hydraulic system of a drive of brakes 14.3. Check of brake tubes and hoses 14.4. Replacement of brake hoses 14.5. Height of installation of a pedal of a brake 14.6. Free wheeling of a pedal of a brake 14.7. Distance of a pedal of a brake from a floor 14.8. Check of the vacuum amplifier of brakes 14.9. Parking brake 14.10. Brake pedal 14.11. Main brake cylinder 14.12. Vacuum amplifier of brakes 14.13. Replacement of forward brake shoes 14.14. Replacement of brake shoes on back drum-type brakes 14.15. Replacement of brake shoes on back disk brakes 14.16. Parking brake 14.17. Block of hydraulic management (HCU) 14.18. Forward sensor of frequency of rotation of a wheel 14.19. Back sensor of frequency of rotation of a wheel 14.20. Gear rotor of the sensor of frequency of rotation of a wheel 14.21. Repair of the working brake cylinder 14.22. Main survey 14.23. Check of functionality 14.24. List of codes of malfunctions of brake system + 15. Suspension bracket + 16. Body + 17. Central air + 18. Electric equipment
|
FORWARD ROTOR OF THE SENSOR
Check
PERFORMANCE ORDER |
1. Check a rotor on absence of damages. |
|
2. Check a gap between a rotor and the sensor of frequency of rotation of a wheel.
Gap: 0,7–1,5 mm |
3. If necessary, replace a rotor of the sensor of frequency of rotation of a wheel. |
|
Removal
PERFORMANCE ORDER |
1. Remove a power shaft from the car. |
|
2. The special AA0 tool OK670 990 remove a sensor rotor. |
|
Installation
PERFORMANCE ORDER |
The special tool establish a sensor rotor. |
|
BACK ROTOR OF THE SENSOR
Check
PERFORMANCE ORDER |
1. Check a rotor on absence of damages. |
|
2. Check a gap between a rotor and the sensor of frequency of rotation of a wheel.
Gap: 0,6–1,6 mm |
3. If necessary, replace a rotor of the sensor of frequency of rotation of a wheel. |
|
Removal
PERFORMANCE ORDER |
1. Remove a nave of a back wheel from the car. |
|
2. The special AA0 tool OK670 990 remove a sensor rotor. |
|
Installation
PERFORMANCE ORDER |
1. The special tool establish a sensor rotor. |
2. Establish a nave of a back wheel. |
|
|
|