Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. Automatic transmission
   10.1. Check of work and adjustment of position of the lever of the selector
   10.2. Check of level and liquid replacement in an automatic transmission
   10.3. Procedure of replacement of liquid in the converter of an automatic transmission
   10.4. Leakages of liquid from an automatic transmission
   10.5. Replacement of oil sealing rings
   10.6. Block of valves of management
   10.7. Radiator of cooling of liquid of an automatic transmission
   10.8. Removal and installation of an automatic transmission
   10.9. Repair of an automatic transmission
   10.10. Oil pump
   10.11. The case of the regulating valve
   10.12. O/D switch
   10.13. Switch of a range of a transmission
   10.14. Sensor of temperature of an automatic transmission
   10.15. The sensor of frequency of rotation on entrances / turbines
   10.16. Sensor of speed
   10.17. Electromagnetic valves
   10.18. Linear electromagnetic valve
   10.19. Selector lever
   10.20. Repair of the lever of the selector
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

10. Automatic transmission

GENERAL INFORMATION

Automatic transmission

1–oil pump;
2–coupling of transfer of a backing;
3–coupling case;
4–coupling of transfers of a forward course;
5–block of planetary gear wheels;
6–target case;
7–coupling 3-ей/4th transfers;
8–target gear wheel;
9–torque converter;
10-differential;

11-intermediate gear wheel;
12-coupling of the bottom transfers and backing;
13-unilateral coupling number 2 (type roller or ekstsentrikovy roller);
14-unilateral coupling number 1 (such as an ekstsentrikovy roller);
15-turbine shaft;
16-shaft of the oil pump

Chart of transfer of capacity

1–cranked shaft;
2–drive plate;
3–torque converter;
4–turbine shaft;
5–shaft of the oil pump;
6–oil pump;
7–coupling of transfers of a forward course;
8–movement coupling by inertia;
9–coupling 3-ей/4th transfers;
10-coupling of transfer of a backing;
11-brake tapes 2-ой/of the 4th transfers;
12-coupling of the bottom transfers and backing;
13-unilateral coupling number 1 (such as an ekstsentrikovy roller);
14-unilateral coupling number 2 (type roller or ekstsentrikovy roller);
15-big solar gear wheel;
16-small solar gear wheel;
17-satellite;
18-drove;
19-internal gear wheel;
20-parking gear wheel;
21-target gear wheel;
22-промежуточ ny gear wheel;
23-cylindrical gear wheel