Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. Automatic transmission
   10.1. Check of work and adjustment of position of the lever of the selector
   10.2. Check of level and liquid replacement in an automatic transmission
   10.3. Procedure of replacement of liquid in the converter of an automatic transmission
   10.4. Leakages of liquid from an automatic transmission
   10.5. Replacement of oil sealing rings
   10.6. Block of valves of management
   10.7. Radiator of cooling of liquid of an automatic transmission
   10.8. Removal and installation of an automatic transmission
   10.9. Repair of an automatic transmission
   10.10. Oil pump
   10.11. The case of the regulating valve
   10.12. O/D switch
   10.13. Switch of a range of a transmission
   10.14. Sensor of temperature of an automatic transmission
   10.15. The sensor of frequency of rotation on entrances / turbines
   10.16. Sensor of speed
   10.17. Electromagnetic valves
   10.18. Linear electromagnetic valve
   10.19. Selector lever
   10.20. Repair of the lever of the selector
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

10.13. Switch of a range of a transmission

Check

PERFORMANCE ORDER
1. Check that the starter works only at key turn in the ignition lock the situation START and the selector lever in positions P or N.
2. Check that lamps of a backing are lit only when moving the lever of the selector to a position R and a key in the ignition lock in the situation START.
3. Check that position of the lever of the selector and the indicator of the chosen position coincide.
4. Otherwise, check the switch of a range of a transmission.

Conductivity check

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Disconnect the socket of the switch of a range of a transmission.
3. Check conductivity between contacts of the switch of a range of a transmission.
4. If conductivity does not correspond demanded, adjust or replace the switch of a range of a transmission.
5. Connect the socket of the switch of a range of a transmission.
6. Connect a wire to the negative plug of the storage battery.

Adjustment

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Lift up the diagnostic socket from the sensor of a measuring instrument of a consumption of air (MAF).
3. Disconnect sockets of sensors of air temperature and a measuring instrument of a consumption of air.
4. Remove a zabornik of fresh air and the case of the air filter.
5. Turn out nuts. Disconnect a selector cable.
6. Move the selector lever to a position N.
7. Disconnect the socket of the switch of a range of a transmission.
8. Turn out bolts of fastening of the switch of a range of a transmission.
9. Connect an ohmmeter between plugs 5 and 7.
10. Adjust position of the switch so that conductivity between contacts of the switch corresponded to the demanded.
11. Tighten two bolts of fastening of the switch of a range of a transmission.

Inhaling moment: 7,9–10,7 N • m

12. Check that conductivity of the switch of a range of a transmission corresponds to the demanded.
13. Connect the socket of the switch of a range of a transmission.
14. Connect a cable of the selector and fix nuts.

Inhaling moment: 32–46 N • m

15. Establish the air filter and a zabornik of fresh air.
16. Connect sockets of sensors of air temperature and a measuring instrument of a consumption of air.
17. Establish the diagnostic socket.
18. Connect a wire to the negative plug of the storage battery.