Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
- 14. Brake system
   14.1. Specifications
   14.2. Pumping of hydraulic system of a drive of brakes
   14.3. Check of brake tubes and hoses
   14.4. Replacement of brake hoses
   14.5. Height of installation of a pedal of a brake
   14.6. Free wheeling of a pedal of a brake
   14.7. Distance of a pedal of a brake from a floor
   14.8. Check of the vacuum amplifier of brakes
   14.9. Parking brake
   14.10. Brake pedal
   14.11. Main brake cylinder
   14.12. Vacuum amplifier of brakes
   14.13. Replacement of forward brake shoes
   14.14. Replacement of brake shoes on back drum-type brakes
   14.15. Replacement of brake shoes on back disk brakes
   14.16. Parking brake
   14.17. Block of hydraulic management (HCU)
   14.18. Forward sensor of frequency of rotation of a wheel
   14.19. Back sensor of frequency of rotation of a wheel
   14.20. Gear rotor of the sensor of frequency of rotation of a wheel
   14.21. Repair of the working brake cylinder
   14.22. Main survey
   14.23. Check of functionality
   14.24. List of codes of malfunctions of brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


. a7a4cf13


14.16. Parking brake

GENERAL INFORMATION

Parking brake

1–handle of the lever of gear shifting;
2–overlay of the central console;
3–central console;
4–screws;
5–assembly bolts;
6–lever of the parking brake;
7–returnable spring;

8–back part of a cable of the parking brake;
9–forward part of a cable of the parking brake;
10-clips;
11-bolts;
12-adjusting nut;
13-box of the control unit by a safety cushion

Removal


Prevention

Establish the switch of the parking brake so that it contacted with the lever of the parking brake when the lever – is completely lowered.


PERFORMANCE ORDER
1. Remove the handle of the lever of gear shifting.
2. Turn out two screws of fastening of an overlay of the central console after a detachment of the socket of illumination of the lighter.
3. Turn out four screws and two bolts in a back part of the central console and remove the central console.
4. Turn out adjusting nuts.
5. Turn out two assembly bolts fixing knot of the lever of the parking brake to the car bottom.
6. Turn out the screw, the fixing switch of the parking brake to lever knot.

Prevention

If the car moved recently, the system of production of the fulfilled gases will be hot.


7. Remove a returnable spring and release two back cables of the parking brake from a forward cable.
8. Extend a forward cable of the parking brake from rubber consolidation.
9. If it is necessary to remove one or both back cables of the parking brake, remove the clips, fixing a cable cover to the body bottom.
10. Turn out a bolt and two nuts, fixing each back cable of the parking brake to the body bottom.
11. Remove a clip, fixing a cover of a cable of the parking brake to a brake board.
12. Disconnect a cable of the parking brake from a back brake shoe and extend it from a brake board.

Installation

PERFORMANCE ORDER
1. Pass a cable of the parking brake through a brake board and fix a cable cover a clip.
2. Fix a cable of the parking brake on a back brake shoe.
3. Lay a back part of a cable on the bottom of the car and fix it a bolt and two nuts.

Inhaling moment:
Bolts: 7–10 N • m
Nuts: 19–26 N • m
4. A clip fix a forward part of a back cable of the parking brake on the car bottom.
5. If the forward part of a cable acted in film, insert it through rubber consolidation and connect a lobby and back parts of cables of the parking brake.
6. In salon of the car connect a forward part of a cable to the lever of the parking brake and screw an adjusting nut.
7. Fix a cable regulator a clip.
8. If acted in film, establish the switch of the parking brake and fix it the screw.
9. Establish knot of the lever of the parking brake on the bottom of the car and fix it two bolts.

Inhaling moment: 19–26 N • m
10. Adjust the parking brake.
11. Establish the central console and fix two bolts and four screws.
12. Connect the socket of the lighter and establish an overlay of the central console.
13. Establish the handle of the lever of gear shifting.