Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
- 14. Brake system
   14.1. Specifications
   14.2. Pumping of hydraulic system of a drive of brakes
   14.3. Check of brake tubes and hoses
   14.4. Replacement of brake hoses
   14.5. Height of installation of a pedal of a brake
   14.6. Free wheeling of a pedal of a brake
   14.7. Distance of a pedal of a brake from a floor
   14.8. Check of the vacuum amplifier of brakes
   14.9. Parking brake
   14.10. Brake pedal
   14.11. Main brake cylinder
   14.12. Vacuum amplifier of brakes
   14.13. Replacement of forward brake shoes
   14.14. Replacement of brake shoes on back drum-type brakes
   14.15. Replacement of brake shoes on back disk brakes
   14.16. Parking brake
   14.17. Block of hydraulic management (HCU)
   14.18. Forward sensor of frequency of rotation of a wheel
   14.19. Back sensor of frequency of rotation of a wheel
   14.20. Gear rotor of the sensor of frequency of rotation of a wheel
   14.21. Repair of the working brake cylinder
   14.22. Main survey
   14.23. Check of functionality
   14.24. List of codes of malfunctions of brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

14.10. Brake pedal

GENERAL INFORMATION

Brake pedal

1–шплинт;
2–a pin with a head and an opening under шплинт;
3–nut;
4–lock washer;
5–sharnirny bolt;
6–spring;
7–pedal;
8–rasporny plug of a pedal of a brake;
9–plug of a pedal of a brake;
10-stopper;
11-slip

Removal

PERFORMANCE ORDER
1. Remove шплинт, and to remove a pin with a head and an opening under шплинт.
2. Unscrew a nut and remove a lock washer, a flat washer, and a sharnirny bolt.
3. Remove a brake pedal, a returnable spring and the rasporny plug of a pedal of a brake.
4. If necessary, remove the plug of a pedal of a brake, a stopper and an overlay of a pedal of a brake.

Installation

PERFORMANCE ORDER
1. If necessary, establish a stopper of a pedal of a brake, a brake pedal, and the plug of a pedal of a brake.
2. Establish the rasporny plug of a pedal of a brake and a sharnirny bolt.
3. Establish a returnable spring of a pedal of a brake.
4. Establish a flat washer, a lock washer, and screw a nut.
5. Establish a pin with a head and an opening under шплинт and new шплинт.
6. After installation, check and adjust height of installation of a pedal and a free wheeling of a pedal of a brake.