Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
- 18. Electric equipment
   18.1. Specifications
   18.2. Electric chains
   18.3. Safety locks
   18.4. Storage battery
   18.5. Check of level and density of electrolit and charging
   18.6. Unattended batteries
   18.7. Wires and plugs
   18.8. Charging of standard batteries
   18.9. Starter
   18.10. Switch of blocking of a starter
   18.11. Removal and starter installation
   18.12. Starter repair
   18.13. Check of the traction relay
   18.14. Check of brushes and shchetkoderzhatel
   18.15. Check of coils of a stator
   18.16. Rotor check
   18.17. Generator
   18.18. Belt of a drive of the generator
   18.19. Removal and generator installation
   18.20. Generator repair
   18.21. Check of a heater of back glass
   18.22. Safety cushion of the driver
   18.23. Safety cushion of the forward passenger
   18.24. Spiral wire
   18.25. Diagnostics of malfunctions of system of start-up and methods of their elimination
   + 18.26. Electric circuits


a7a4cf13

18.23. Safety cushion of the forward passenger

GENERAL INFORMATION

Prevention

Do not carry out service of a safety cushion or electric components at the connected safety cushion.


Removal

PERFORMANCE ORDER
1. Turn out two screws in corners of the basis of a ware box and remove a ware box.
2. Remove a lateral cover and disconnect the electric socket fixed in T-shaped...........
3. Turn out two lobbies and two back bolts.
4. Disconnect the electric socket of a safety cushion from a plait of wires.

Prevention

The safety cushion is connected by sockets of orange and dark blue color. The section of the mother socket consists of two separate parts, one for a safety cushion, and the second for a sound signal. These parts mechanically incorporate for connection to dark blue section of the socket of a safety cushion and are fixed by two latches excluding their spontaneous separation. The section of the socket of a safety cushion also has the clamps connecting two parts of the socket, after their separation. This feature excludes unintentional expansion of a safety cushion. At division of two sections of the socket, first of all it is necessary to disconnect section of the socket of orange color. Connection is necessary for carrying out in sequence, return to separation.


5. Remove a safety cushion from the dashboard.


Installation

Prevention

Be careful, that at installation of a safety cushion not to clamp a plait of wires between dashboard components. Loops and a perezhatiya of a plait of wires can bring to violation of an electric power-supply circuit of a safety cushion.


PERFORMANCE ORDER
1. Connect the safety cushion socket to a plait of wires of the car.
2. Establish a safety cushion of the forward passenger.
3. Fix a safety cushion four bolts, having tightened them the demanded moment.

Inhaling moment: 8–12 N • m
4. Establish a ware box and fix it two screws.
5. Check lack of codes of malfunction of a safety cushion.