Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
- 15. Suspension bracket
   15.1. Specifications
   15.2. Check and adjustment of corners of installation of wheels
   15.3. Bottom lever of a forward suspension bracket
   15.4. Forward stabilizer of cross-section stability
   15.5. Cross-section drafts and longitudinal lever of a back suspension bracket
   15.6. Back stabilizer of cross-section stability
   15.7. Cross-section beam of a back suspension bracket
   15.8. Repair of an amortization rack of a forward suspension bracket
   15.9. Repair of an amortization rack of a back suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

15.5. Cross-section drafts and longitudinal lever of a back suspension bracket

GENERAL INFORMATION

Elements of a back suspension bracket

1–bolt;
2–washers;
3–lock nut;
4–washer and spring washer;
5–forward cross-section draft;
6–back cross-section draft (adjustable);
7–sharnirny bolts;
8–washers;
9–longitudinal lever;
10-nut of fastening of the stabilizer;
12-stabilizer earring;
13-assembly bolt;
14-stabilizer arm;
15-plug of an arm of the stabilizer;
16-stabilizer;
17-plate;
18-bolts

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and fix on support.
2. Remove a wheel.
3. Turn out a bolt and remove a washer of fastening of forward cross-section bent for to a cross-section beam.
4. Turn out a bolt and remove a washer of fastening of back cross-section bent for to a cross-section beam.
5. Turn out two nuts of fastening of a cable of the parking brake to the longitudinal lever of a back suspension bracket.
6. Turn out a nut and remove a sharnirny bolt of fastening of cross-section bent for to a support of a back nave.
7. Turn out two sharnirny bolts of fastening of the longitudinal lever of a back suspension bracket.
8. Remove the longitudinal lever of a back suspension bracket.

Installation

PERFORMANCE ORDER
1. Establish the longitudinal lever of a back suspension bracket in an arm and on a support of a nave and fix two bolts.

Inhaling moment: 43–61 N • m
2. Establish an arm of a cable of the parking brake on the longitudinal lever of a back suspension bracket and fix two nuts.

Inhaling moment: 19–26 N • m
3. Establish cross-section drafts on a support of a nave and fix the sharnirny bolt, two washers and a spring washer, then tighten a lock nut.

Inhaling moment: 93–117 N • m

4. Establish forward cross-section draft and fix it a bolt and a lock washer to a cross-section beam.

Inhaling moment: 93–117 N • m

5. Establish back cross-section draft and fix it a bolt and a lock washer to a cross-section beam.

Inhaling moment: 93–117 N • m
6. Establish a wheel.
7. After installation, check corners of installation of back wheels.

Prevention

Tighten bolts and nuts of fastening of cross-section drafts and the longitudinal lever the demanded moment after car installation on wheels.