Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
- 5. Power supply system and release
   5.1. Adjustment of a cable of an accelerator
   5.2. Check of a filtering element of the air filter
   5.3. Elements of system of production of the fulfilled gases
   5.4. A filtering element of the air filter
   5.5. Check of a corner of an advancing of ignition and frequency of rotation of idling
   5.6. Electronic control unit engine (ESM)
   5.7. Check of system of ventilation of a case (PCV)
   5.8. Check of system of catching паров fuels
   5.9. Check of the valve of system of catching паров fuels
   5.10. Separator check паров fuels
   5.11. Check of the bilateral valve of control
   5.12. Canister check with absorbent carbon
   5.13. Valve check паров fuels
   5.14. Sensor of measurement of a consumption of air (TED)
   5.15. Vacuum check
   5.16. Sensor of measurement of a consumption of air (TED)
   5.17. The sensor of temperature of cooling liquid
   5.18. Sensor of provision of a butterfly valve
   5.19. The warmed sensor of oxygen
   5.20. Check of forward and back warmed sensors of oxygen
   5.21. Main relay
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


5.5. Check of a corner of an advancing of ignition and frequency of rotation of idling

Check of a corner of an advancing of ignition
PERFORMANCE ORDER
1. Tighten the parking brake.
2. Start up the engine and warm up it to normal working temperature.
3. Switch off everything consumers of electric energy.
4. Connect to the engine a tachometer and to a high-voltage wire of the first cylinder the stroboscope sensor.
5. On combination of labels on a pulley of a cranked shaft with the index, check a corner of an advancing of ignition.

Corner of an advancing of ignition: 8±5 ° to VMT (on frequency of rotation of idling)


Prevention

The corner of an advancing of ignition is not regulated.


6. If the corner of an advancing of ignition differs from demanded, replace the electronic control unit with the engine.

Check of frequency of rotation of idling

PERFORMANCE ORDER
1. Tighten the parking brake.
2. Start up the engine and warm up it to normal working temperature.
3. Switch off everything consumers of electric energy.
4. Connect an inductive tachometer to a spark plug of the first cylinder or connect a tachometer wire to contact 3 diagnostic sockets (DLC).

Prevention

Frequency of rotation of idling is not regulated and supported by the electronic control unit of the engine. Change of frequency of rotation of idling can be caused by violations in operation of the valve of a control system as frequency of rotation of idling (IAC) or leaks in an inlet collector.


5. At the gear shifting lever in neutral situation measure frequency of rotation of idling.

Frequency of rotation of idling: 800±50 mines-1

6. Disconnect a tachometer from a spark plug of the first cylinder or the diagnostic socket (DLC).
7. Switch off the engine.