Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
- 5. Power supply system and release
   5.1. Adjustment of a cable of an accelerator
   5.2. Check of a filtering element of the air filter
   5.3. Elements of system of production of the fulfilled gases
   5.4. A filtering element of the air filter
   5.5. Check of a corner of an advancing of ignition and frequency of rotation of idling
   5.6. Electronic control unit engine (ESM)
   5.7. Check of system of ventilation of a case (PCV)
   5.8. Check of system of catching паров fuels
   5.9. Check of the valve of system of catching паров fuels
   5.10. Separator check паров fuels
   5.11. Check of the bilateral valve of control
   5.12. Canister check with absorbent carbon
   5.13. Valve check паров fuels
   5.14. Sensor of measurement of a consumption of air (TED)
   5.15. Vacuum check
   5.16. Sensor of measurement of a consumption of air (TED)
   5.17. The sensor of temperature of cooling liquid
   5.18. Sensor of provision of a butterfly valve
   5.19. The warmed sensor of oxygen
   5.20. Check of forward and back warmed sensors of oxygen
   5.21. Main relay
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


5.17. The sensor of temperature of cooling liquid

Removal


Prevention

The sensor of temperature of cooling liquid is located glad with the thermostat.


PERFORMANCE ORDER
1. Disconnect the socket from the sensor of temperature of cooling liquid.
2. Turn out the sensor of temperature of cooling liquid.

Check

PERFORMANCE ORDER
1. Measure resistance of the sensor at various temperatures.
Resistance of the sensor at temperature 20°С – 2,45±0,24 kiloohm.
Resistance of the sensor at temperature 80°С – 0,322±0,032 kiloohm.
2. If resistance of the sensor differs from demanded values, replace it.

Installation

PERFORMANCE ORDER

1. Establish the sensor of temperature of cooling liquid with new laying.

Inhaling moment: 25-29H • m

2. Connect to the sensor the socket.
3. Start up the engine and check absence of leaks from cooling system.