Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
- 5. Power supply system and release
   5.1. Adjustment of a cable of an accelerator
   5.2. Check of a filtering element of the air filter
   5.3. Elements of system of production of the fulfilled gases
   5.4. A filtering element of the air filter
   5.5. Check of a corner of an advancing of ignition and frequency of rotation of idling
   5.6. Electronic control unit engine (ESM)
   5.7. Check of system of ventilation of a case (PCV)
   5.8. Check of system of catching паров fuels
   5.9. Check of the valve of system of catching паров fuels
   5.10. Separator check паров fuels
   5.11. Check of the bilateral valve of control
   5.12. Canister check with absorbent carbon
   5.13. Valve check паров fuels
   5.14. Sensor of measurement of a consumption of air (TED)
   5.15. Vacuum check
   5.16. Sensor of measurement of a consumption of air (TED)
   5.17. The sensor of temperature of cooling liquid
   5.18. Sensor of provision of a butterfly valve
   5.19. The warmed sensor of oxygen
   5.20. Check of forward and back warmed sensors of oxygen
   5.21. Main relay
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


5.9. Check of the valve of system of catching паров fuels

PERFORMANCE ORDER
1. Disconnect vacuum hoses from the catching valve паров fuels (EVAR) and blow it.
2. Be convinced that air does not pass through the valve.
3. Disconnect from the valve the socket and additional wires connect the valve to the storage battery, as is shown in drawing.
4. The compressed air blow the valve.
5. If air does not pass through the valve, replace it.
6. Connect to the valve the socket.
7. Connect to the valve vacuum hoses.