Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation

KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
- 7. Ignition system
   7.1. Specifications
   7.2. Ignition coil
   7.3. Spark plugs
   7.4. High-voltage wires
   7.5. Corner of an advancing of ignition
   7.6. Sensor of provision of a camshaft
   7.7. Sensor of an angle of rotation of a cranked shaft
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment

7.7. Sensor of an angle of rotation of a cranked shaft

Removal

PERFORMANCE ORDER

1. Disconnect a wire from the negative plug of the storage battery.
2. Disconnect a plait of wires.
3. Turn out a bolt of fastening of the sensor.
	4. Remove the sensor from a transmission on models with the TED engine or from the case of the oil pump on models with the BFD engine.

Installation

PERFORMANCE ORDER

1. To establish the sensor of an angle of rotation of a cranked shaft on a transmission case on models with the TED engine.
Establish the sensor of an angle of rotation of a cranked shaft on the case of the oil pump on models with the BFD engine.

2. Fix the sensor a bolt.

3. Connect a plait of wires.

4. Connect a wire to the negative plug of the storage battery.