Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
- 6. Fuel system
   6.1. Specifications
   6.2. Pressure removal in fuel system
   6.3. Activization of fuel system
   6.4. Check of residual pressure in fuel system
   6.5. Check of fuel pipelines
   6.6. Fuel pump
   6.7. Check of the maximum pressure created by the pump
   6.8. Check of the relay of the fuel pump
   6.9. Check of fuel nozzles
   6.10. Check of tightness of fuel nozzles
   6.11. Check of productivity of fuel nozzles
   6.12. Check of resistance of fuel nozzles
   6.13. Fuel tank
   6.14. Block of supply of fuel
   6.15. Pressure regulator
   6.16. Fuel pipelines
   6.17. Pipe of a toplivonalivny mouth
   6.18. Fuel filter
   6.19. Quick-detachable connections
   6.20. Fuel highway
   6.21. Fuel nozzles
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


6.20. Fuel highway

Removal


Prevention

Gasoline is explosive, therefore at work with elements of fuel system provide normal ventilation of a workplace, do not use fire, the sparking devices opened by fire-dangerous light devices and do not smoke.
Be convinced that nozzles are reliably established in the fuel highway that will prevent their moving and, probably, damage.


PERFORMANCE ORDER
1. Remove pressure in fuel system.
2. Disconnect a wire from the negative plug of the storage battery.
3. Disconnect four sockets from fuel nozzles.
4. Disconnect quick-detachable connection fuel the highway from the pipeline of supply of fuel.
5. Turn out two bolts and a nut and remove an arm of a cable of an accelerator.
6. Disconnect an accelerator cable.
7. Turn out two bolts of fastening of the fuel highway to an inlet collector.
8. Remove the fuel highway.
9. Remove four clamps, fixing nozzles to the fuel highway.
10. Remove two insulators from a fuel nozzle.
11. Remove a quencher of pulsations of fuel (only the TED engine).
12. Clear interfaced surfaces.

Installation

PERFORMANCE ORDER
1. Establish and fix a quencher of pulsations of fuel.
2. Establish two insulators of a fuel nozzle.
3. Establish nozzles to the fuel highway and fix them four clamps.
4. Establish the fuel highway and fix two bolts.
5. Connect an accelerator cable.
6. Establish an arm of a cable of an accelerator and fix it two bolts and a nut.
7. Connect to the fuel highway the pipeline with quick-detachable connection.
8. Connect four sockets to fuel nozzles.
9. Connect a wire to the negative plug of the storage battery.
10. Start up the engine and check absence of leakages of fuel.