Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Cooling liquid
   4.3. Check of level of cooling liquid
   4.4. Quality of cooling liquid
   4.5. Check of tightness of system of cooling
   4.6. Replacement of cooling liquid
   4.7. Check of a cover of a radiator
   4.8. Valve of return pressure
   4.9. Thermostat
   4.10. Relay of the fan of a radiator
   4.11. Engine of the fan of a radiator
   4.12. Radiator
   4.13. Water pump
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


4.9. Thermostat

GENERAL INFORMATION

Thermostat

1–thermostat casing;

2–laying;

3–thermostat

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Merge cooling liquid in the suitable container.
3. Turn out nuts and a bolt of fastening of a casing of the thermostat.
4. Remove a casing of the thermostat and the thermostat.

Check

PERFORMANCE ORDER
1. Visually check a thermostat condition.
2. On a thread suspend the thermostat in a transparent vessel with water.

3. Insert into water the thermometer, heat up a vessel with water and watch the thermostat valve. Define temperature of the beginning of opening and complete opening of the valve of the thermostat.

Temperature of the beginning of opening of the valve of the thermostat: 80,5–83,5 °C.
Temperature of complete opening of the valve of the thermostat: 95 °C.
Thermostat valve stroke: 8,0 mm

Installation

PERFORMANCE ORDER
1. Establish the thermostat in a head of the block of cylinders so that the valve for removal of air settled down from above.
2. Establish new laying of the thermostat.
3. Establish a casing of the thermostat and fix a bolt and nuts.

Inhaling moment: 19–26 Nanometers

4. Fill in in cooling system necessary amount of demanded cooling liquid.
5. Connect a wire to the negative plug of the storage battery.
6. Start up the engine and check absence of leaks from cooling system.