Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Cooling liquid
   4.3. Check of level of cooling liquid
   4.4. Quality of cooling liquid
   4.5. Check of tightness of system of cooling
   4.6. Replacement of cooling liquid
   4.7. Check of a cover of a radiator
   4.8. Valve of return pressure
   4.9. Thermostat
   4.10. Relay of the fan of a radiator
   4.11. Engine of the fan of a radiator
   4.12. Radiator
   4.13. Water pump
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

4.11. Engine of the fan of a radiator

GENERAL INFORMATION

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Merge cooling liquid in the suitable container.
3. Remove a zabornik of fresh air.
4. Disconnect the socket from the engine of the fan of a radiator.
5. Weaken a collar and remove the top hose of a radiator.
6. Turn out two top bolts of fastening of a casing of the fan of a radiator.
7. Turn out two bottom bolts of fastening of a casing of the fan of a radiator.
8. Lift and remove a casing of the fan of a radiator from a motor compartment.
9. Remove a clip and remove the radiator fan.
10. Turn out three bolts and nuts and remove the engine of the fan of a radiator.

Check

PERFORMANCE ORDER
The ampermeter check a current consumed by the engine of the fan of a radiator, as is shown in drawing.

Current: 8–13 And

Installation

PERFORMANCE ORDER
1. Establish the engine of the fan of a radiator and fix three bolts and nuts.
2. Establish the fan and fix a clip.
3. Establish a radiator casing on a radiator.
4. Screw and tighten the top bolts of fastening of a casing of the fan.

Inhaling moment: 7,8–11 N • m

5. Screw and tighten the bottom bolts of fastening of a casing of the fan.

Inhaling moment: 7,8–11 N • m

6. Establish the top hose of a radiator and fix it a collar.
7. Connect the socket to the engine of the fan of a radiator.
8. Establish a zabornik of fresh air and fix it a bolt and a nut.
9. Fill in in cooling system necessary amount of demanded cooling liquid.
10. Connect a wire to the negative plug of the storage battery.
11. Start up the engine and check absence of leaks from cooling system.