Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Cooling liquid
   4.3. Check of level of cooling liquid
   4.4. Quality of cooling liquid
   4.5. Check of tightness of system of cooling
   4.6. Replacement of cooling liquid
   4.7. Check of a cover of a radiator
   4.8. Valve of return pressure
   4.9. Thermostat
   4.10. Relay of the fan of a radiator
   4.11. Engine of the fan of a radiator
   4.12. Radiator
   4.13. Water pump
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

4.13. Water pump

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Merge cooling liquid in the suitable container.
3. Remove a gear belt of a drive of the gas-distributing mechanism.
4. Remove a roller of the mechanism of a tension and directing roller of a gear belt.
5. Turn out bolts and remove the water pump.

Check


Prevention

The water pump is not maintainable, and in case of its exit out of operation, replace it assembled.


PERFORMANCE ORDER
1. Check the water pump on lack of cracks and damages.
2. Turn a shaft of the water pump and check smoothness of rotation in the absence of noise.
3. If necessary, replace the water pump.

Installation

PERFORMANCE ORDER
1. Clear of the remains of laying and an alien material a surface of consolidation of the water pump.
2. Establish on the water pump new laying. Exclude laying falling as the layer of hermetic put on laying, can be damaged. Establish laying by the party with hermetic to a condensed surface.
3. Establish the water pump and fix bolts.

Inhaling moment: 19–26 N • m

4. Establish a roller of the mechanism of the tension, directing roller and a gear belt.
5. Fill in in cooling system necessary amount of demanded cooling liquid.
6. Connect a wire to the negative plug of the storage battery.
7. Start up the engine and check absence of leaks from cooling system.