Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation

KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
- 4. Cooling system
   4.1. Specifications
   4.2. Cooling liquid
   4.3. Check of level of cooling liquid
   4.4. Quality of cooling liquid
   4.5. Check of tightness of system of cooling
   4.6. Replacement of cooling liquid
   4.7. Check of a cover of a radiator
   4.8. Valve of return pressure
   4.9. Thermostat
   4.10. Relay of the fan of a radiator
   4.11. Engine of the fan of a radiator
   4.12. Radiator
   4.13. Water pump
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


4.6. Replacement of cooling liquid



Do not uncover a radiator on the hot engine as leaving pairs can lead to strong burns. Close a radiator cover thick rags and slowly unscrew a cover before emergence of hissing of leaving steam.

After the steam-out termination slowly turn on, and uncover a radiator.

Do not use as cooling liquid alcohol or cooling liquid on the basis of methanol. Use only the distilled water in a mix with antifreeze.

1. Uncover a radiator and turn out a stopper plum of cooling liquid.
2. Merge cooling liquid in the suitable container.
3. Wash out system of cooling by a stream at its finest and merge water from cooling system.
4. Screw into place a stopper plum of cooling liquid.
5. Fill in cooling liquid on a basis этиленгликоля in cooling system. Capacity of system of cooling: 6 l
6. Start up the engine with an open cover of a radiator before warming up of the top hose of a radiator.
7. At operation of the engine on frequency of idling add cooling liquid while it will not reach a bulk mouth of a radiator.
8. Establish a radiator cover.
9. Cool the engine and check level of cooling liquid.