Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
- 8. Coupling
   8.1. Specifications
   8.2. Pumping of hydraulic system of a drive of coupling
   8.3. Adjustment of a pedal of coupling
   8.4. Coupling pedal
   8.5. Main cylinder of coupling
   8.6. Working cylinder of coupling
   8.7. Coupling disk
   8.8. Check of the bearing of switching off of coupling
   8.9. Check of a casing of coupling with a press disk
   8.10. Check of a disk of coupling
   8.11. Check of the central bearing
   8.12. Flywheel check
   8.13. Repair of the main cylinder of coupling
   8.14. Repair of the working cylinder of coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

8.8. Check of the bearing of switching off of coupling

GENERAL INFORMATION

Prevention

The bearing of switching off of coupling is tight, and should not be washed out in solvent.


PERFORMANCE ORDER
1. Check a condition of the bearing of switching off of coupling which should rotate easily, evenly and silently and in it should be absent люфт. The working surface of the bearing influencing a press spring should be smooth, without cracks, local corrosion or development.
2. It is possible to define the faulty bearing of switching off of coupling, without removing it from the car for what it is necessary to press a coupling pedal at the working engine. If by pressing of a pedal of coupling there is an additional noise, means, the bearing of switching off of coupling is faulty, and it is necessary to replace it.