Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation

KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
- 8. Coupling
   8.1. Specifications
   8.2. Pumping of hydraulic system of a drive of coupling
   8.3. Adjustment of a pedal of coupling
   8.4. Coupling pedal
   8.5. Main cylinder of coupling
   8.6. Working cylinder of coupling
   8.7. Coupling disk
   8.8. Check of the bearing of switching off of coupling
   8.9. Check of a casing of coupling with a press disk
   8.10. Check of a disk of coupling
   8.11. Check of the central bearing
   8.12. Flywheel check
   8.13. Repair of the main cylinder of coupling
   8.14. Repair of the working cylinder of coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


8.10. Check of a disk of coupling

1. Check a condition of frictional overlays of a disk of coupling and in the presence of oil traces on them or mechanical damages replace a coupling disk.
2. Check reliability of zaklepochny connections of frictional slips to a coupling disk. In the presence of defects, replace a coupling disk.
3. Check a vystupaniye of frictional slips over heads of rivets. If a vystupaniye less admissible, replace a coupling disk.

Vystupaniye: 0,3 mm

4. Establish a coupling disk on an opravka in the centers and, by the indicator of hour type measure its palpation. If palpation is higher admissible, replace a coupling disk.

Palpation: 0,7 mm