Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
- 14. Brake system
   14.1. Specifications
   14.2. Pumping of hydraulic system of a drive of brakes
   14.3. Check of brake tubes and hoses
   14.4. Replacement of brake hoses
   14.5. Height of installation of a pedal of a brake
   14.6. Free wheeling of a pedal of a brake
   14.7. Distance of a pedal of a brake from a floor
   14.8. Check of the vacuum amplifier of brakes
   14.9. Parking brake
   14.10. Brake pedal
   14.11. Main brake cylinder
   14.12. Vacuum amplifier of brakes
   14.13. Replacement of forward brake shoes
   14.14. Replacement of brake shoes on back drum-type brakes
   14.15. Replacement of brake shoes on back disk brakes
   14.16. Parking brake
   14.17. Block of hydraulic management (HCU)
   14.18. Forward sensor of frequency of rotation of a wheel
   14.19. Back sensor of frequency of rotation of a wheel
   14.20. Gear rotor of the sensor of frequency of rotation of a wheel
   14.21. Repair of the working brake cylinder
   14.22. Main survey
   14.23. Check of functionality
   14.24. List of codes of malfunctions of brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

14.12. Vacuum amplifier of brakes

Removal

PERFORMANCE ORDER
1. Remove the main brake cylinder.
2. Disconnect a vacuum hose from the unilateral valve of the vacuum amplifier of brakes.
3. In salon of the car remove spring шплинт, and to remove a pin with a head and an opening under шплинт.
4. Unscrew four nuts of fastening of the vacuum amplifier of brakes.
5. Remove the vacuum amplifier of brakes.
6. Remove laying of an arm of the vacuum amplifier of brakes.

Installation

PERFORMANCE ORDER
1. Establish the vacuum amplifier of brakes with new laying on a partition of a motor compartment and fix four nuts.

Inhaling moment: 19–26 N • m
2. Establish a pin with a head and an opening under шплинт and fix its new spring the shplinty.
3. From a motor compartment attach a vacuum hose to the unilateral valve of the vacuum amplifier of brakes.
4. Establish the main brake cylinder on the vacuum amplifier of brakes and fix two nuts.

Inhaling moment: 9,8–16 N • m
5. Connect brake tubes and tighten connecting nuts of fastening of tubes.

Inhaling moment: 13–22 N • m
6. Connect the socket of the sensor of level of brake liquid.
7. Fill a popolnitelny tank of brake system with brake liquid to a label the MOVE.
8. Remove air from a hydraulic contour of brake system.
9. Check absence of leakages of brake liquid.
10. Check and, if necessary, adjust height of installation of a pedal and a free wheeling of a pedal of a brake.