Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
- 12. Steering
   12.1. Specifications
   12.2. Steering check without the amplifier
   12.3. Steering check with the hydraulic amplifier
   12.4. Belt of a drive of the pump of the amplifier of a steering
   12.5. Replacement of a protective cover of steering draft
   12.6. Steering shaft
   12.7. Steering transfer
   12.8. Pump of the amplifier of a steering
   12.9. Repair of a steering shaft
   12.10. Repair of steering transfer
   12.11. Repair of the pump of the amplifier of a steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

12.7. Steering transfer

GENERAL INFORMATION

Steering transfer

1–nut of fastening of a tip of steering draft;
2–rotary fist;
3–pressure head hose;
4–returnable hose;
5–consolidation cover;
6–coupling bolt;
7–nuts of fastening of steering transfer;
8–steering transfer and drafts;
9–draft of gear shifting;
10-draft of a choice of transfers;
11-arm

Removal

PERFORMANCE ORDER
1. Weaken nuts of fastening of forward wheels.
2. Lift a forward part of the car and fix on support.
3. Remove wheels.
4. Take шплинты and unscrew nuts of fastening of pins of spherical hinges of tips of steering bent for to rotary fists.
5. A stripper OK130 283 021, squeeze out pins of spherical hinges of tips of steering drafts from rotary fists.

Prevention

For an exception of damage of a carving of a pin, screw on a carving a temporary nut.


6. Turn out two bolts and nuts and remove an arm of fastening of hoses to a transmission.
7. Disconnect returnable and pressure head hoses.

Prevention

At a detachment of hoses use rags or the suitable container for collecting liquid from hydraulic system of the amplifier of a steering.


8. Turn out two bolts of fastening of the universal hinge and a coupling bolt of fastening of an intermediate shaft.
9. Turn out four nuts of fastening of a steering column to the car, then uncover consolidations.

10. Turn out four nuts of fastening of steering transfer.

11. Disconnect drafts of a choice and gear shifting from a transmission.
12. Remove steering transfer on the right side of the car.

Installation

PERFORMANCE ORDER
1. Establish steering transfer on the right side of the car.
2. Fix steering transfer by four nuts.

Inhaling moment: 37–52 N • m

3. Tighten a bolt of fastening of an intermediate shaft.

Inhaling moment: 18–26 N • m

4. Establish a consolidation cover, then tighten four nuts of fastening of a steering column in the car.
5. Tighten two coupling bolts of fastening of the universal hinge.

Inhaling moment: 18–26 N • m

6. Connect returnable and pressure head hoses.
7. Establish an arm of fastening of hoses to a transmission and fix it bolts and nuts.
8. Establish pins of spherical hinges of tips of steering drafts in rotary fists.
9. Screw nuts of fastening of pins, tighten them the demanded moment and establish шплинты.

Inhaling moment: 29–44 N • m

10. Connect draft of a choice for a transmission.

Inhaling moment: 38–51 N • m

12. Establish wheels.
13. Lower the car.