Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
- 12. Steering
   12.1. Specifications
   12.2. Steering check without the amplifier
   12.3. Steering check with the hydraulic amplifier
   12.4. Belt of a drive of the pump of the amplifier of a steering
   12.5. Replacement of a protective cover of steering draft
   12.6. Steering shaft
   12.7. Steering transfer
   12.8. Pump of the amplifier of a steering
   12.9. Repair of a steering shaft
   12.10. Repair of steering transfer
   12.11. Repair of the pump of the amplifier of a steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

12.6. Steering shaft

GENERAL INFORMATION

Steering shaft

1–safety cushion of the driver;
2–lock nut;
3–steering wheel;
4–casing of a steering column;
5–spiral spring;
6–the combined switch;
7–bottom casing;
8–adjusting plate;
9–dustproof cover;
10-coupling bolt;
11-lock of a steering wheel;
12-steering column assembled;
13-universal hinge;
14-intermediate shaft

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Establish forward wheels for rectilinear movement.
3. Turn out four bolts and remove a safety cushion from a steering wheel.
4. Disconnect the electric socket from the switch of a sound signal.
5. Put combination labels on a steering shaft and a steering wheel, for the correct repeated installation.
6. Turn out a lock nut and remove a spring ring from an end face of a steering shaft.
7. A stripper, remove a steering wheel.

Prevention

Do not remove a steering wheel, hitting with a hammer that to a shaft end face. It will lead to damage of bearings and shaft carvings.


8. Turn out three bottom screws and remove casings of a steering column.
9. Turn out three screws of fastening of the combined switch.

10. Disconnect the electric socket from the combined switch.

11. Shifting on a steering column, remove the combined switch.
12. Disconnect the electric socket from the ignition lock.
13. Turn out the screw of fastening of the lock of ignition.
14. Remove the ignition lock.
15. Turn out two coupling bolts of fastening of the universal hinge.
16. Turn out two bottom nuts of fastening of an arm of a steering column.
17. Turn out two top bolts of fastening of an arm of a steering column.
18. Remove a steering column from the car.

Installation

PERFORMANCE ORDER
1. Establish a steering column in the car.
2. Screw two bottom nuts of fastening of an arm of a steering column.
3. Screw two top bolts of fastening of an arm of a steering column.

Inhaling moment:
Nuts: 16–23 N • m
Bolts: 16–23 N • m

4. Screw two coupling bolts of fastening of the universal hinge.

Inhaling moment: 18–26 N • m

5. Put the ignition lock.
6. Connect to the ignition lock the electric socket.
7. Connect to the combined switch the electric socket.
8. Establish the combined switch on a steering column.
9. Establish the top and bottom casings of a steering column.
10. Screw three screws of fastening of casings of a steering column.
11. Connect sockets, and establish a spiral spring on a shaft of a steering column.
12. According to earlier put labels establish a steering wheel.
13. Establish a spring ring and screw a lock nut.

Inhaling moment: 39–49 N • m

14. Connect the electric socket of a sound signal.
15. Establish a safety cushion.
16. Connect a wire to the negative plug of the storage battery.