Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. Automatic transmission
   10.1. Check of work and adjustment of position of the lever of the selector
   10.2. Check of level and liquid replacement in an automatic transmission
   10.3. Procedure of replacement of liquid in the converter of an automatic transmission
   10.4. Leakages of liquid from an automatic transmission
   10.5. Replacement of oil sealing rings
   10.6. Block of valves of management
   10.7. Radiator of cooling of liquid of an automatic transmission
   10.8. Removal and installation of an automatic transmission
   10.9. Repair of an automatic transmission
   10.10. Oil pump
   10.11. The case of the regulating valve
   10.12. O/D switch
   10.13. Switch of a range of a transmission
   10.14. Sensor of temperature of an automatic transmission
   10.15. The sensor of frequency of rotation on entrances / turbines
   10.16. Sensor of speed
   10.17. Electromagnetic valves
   10.18. Linear electromagnetic valve
   10.19. Selector lever
   10.20. Repair of the lever of the selector
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

10.7. Radiator of cooling of liquid of an automatic transmission

GENERAL INFORMATION

Radiator of cooling of liquid of an automatic transmission:

1–washer;
2–connecting bolt;
3–entrance hose of liquid of an automatic transmission (colder hose);
4–target hose of liquid of an automatic transmission (hotter hose);
5–entrance tube of liquid of an automatic transmission (colder hose);
6–target tube of liquid of an automatic transmission (hotter hose);
7–radiator

Removal

PERFORMANCE ORDER
1. Lift the car and fix on support.
2. Turn out seven screws and remove right mudguards of a motor compartment.
3. Establish under a radiator the pallet for collecting liquid.
4. Disconnect entrance and target hoses of liquid of an automatic transmission.
5. Remove entrance and target tubes of liquid of an automatic transmission.
6. Remove a radiator (see subsection 4.12).

Usanovka

PERFORMANCE ORDER
1. Establish a radiator (see subsection 4.12).
2. Establish entrance and target tubes of liquid of an automatic transmission.

Inhaling moment: 32–47 N • m

3. Pull entrance and target hoses over tubes of liquid of an automatic box before so that end faces of hoses reached fillets on tubes.
4. Establish a hose clip on a hose in the center of marking and under the corner shown in drawing.
5. Check that the clip of a hose does not concern any other parts.
6. Establish right mudguards of a motor compartment and fix seven screws.
7. Lower the car.
8. Check liquid level in an automatic transmission.