Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation

KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. Automatic transmission
   10.1. Check of work and adjustment of position of the lever of the selector
   10.2. Check of level and liquid replacement in an automatic transmission
   10.3. Procedure of replacement of liquid in the converter of an automatic transmission
   10.4. Leakages of liquid from an automatic transmission
   10.5. Replacement of oil sealing rings
   10.6. Block of valves of management
   10.7. Radiator of cooling of liquid of an automatic transmission
   10.8. Removal and installation of an automatic transmission
   10.9. Repair of an automatic transmission
   10.10. Oil pump
   10.11. The case of the regulating valve
   10.12. O/D switch
   10.13. Switch of a range of a transmission
   10.14. Sensor of temperature of an automatic transmission
   10.15. The sensor of frequency of rotation on entrances / turbines
   10.16. Sensor of speed
   10.17. Electromagnetic valves
   10.18. Linear electromagnetic valve
   10.19. Selector lever
   10.20. Repair of the lever of the selector
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


10.2. Check of level and liquid replacement in an automatic transmission



The car should stand on an equal horizontal surface.

Check of level of liquid

1. Tighten the parking brake and block wheels an emphasis, for an exception of a kacheniye of the car.
2. Start up the engine before transmission warming up to temperature 60~70°C.
3. At the working engine move the selector lever from a position P to situation 1 and back in a position P.
4. Leave the engine to work at frequency of rotation of idling.
5. Move the selector lever to a position P.


Use measurements on COOL scale (20°C) only as rough value.

6. Check level of liquid which should be between HOT labels (65°C). If necessary, add necessary amount of demanded liquid.

Check of a condition of liquid



Carefully check a liquid condition in an automatic transmission and define, whether really the automatic transmission should be dismantled. If liquid in an automatic transmission is polluted and burned slightly, it indicates the burned plates or brake tapes.

1. Check color of liquid in an automatic transmission.
2. Check liquids in an automatic transmission on presence of unusual smells. For definition of change of color and a liquid smell, compare it to fresh liquid

Liquid replacement

1. Establish the pallet for collecting liquid under a transmission.
2. Turn out a stopper and merge all liquid from an automatic transmission.
3. Screw a stopper into place.

Inhaling moment: 39–54 N • m

4. Take щуп for measurement of level of liquid and fill in necessary amount of demanded liquid.

Liquid type for an automatic transmission: M-lll or dexron III
Capacity: 5,4 l


Do not pour liquid above F label.

5. Check liquid level in an automatic transmission.