Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation


KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. Automatic transmission
   10.1. Check of work and adjustment of position of the lever of the selector
   10.2. Check of level and liquid replacement in an automatic transmission
   10.3. Procedure of replacement of liquid in the converter of an automatic transmission
   10.4. Leakages of liquid from an automatic transmission
   10.5. Replacement of oil sealing rings
   10.6. Block of valves of management
   10.7. Radiator of cooling of liquid of an automatic transmission
   10.8. Removal and installation of an automatic transmission
   10.9. Repair of an automatic transmission
   10.10. Oil pump
   10.11. The case of the regulating valve
   10.12. O/D switch
   10.13. Switch of a range of a transmission
   10.14. Sensor of temperature of an automatic transmission
   10.15. The sensor of frequency of rotation on entrances / turbines
   10.16. Sensor of speed
   10.17. Electromagnetic valves
   10.18. Linear electromagnetic valve
   10.19. Selector lever
   10.20. Repair of the lever of the selector
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment

a7a4cf13

10.19. Selector lever
GENERAL INFORMATION

Selector lever
1–ashtray;
2–I will corrode lighter illuminations;
3–forward section of the central console;
4–a box for storage of small subjects;
 5–central console;
6–selector cable;
7–socket;
8–selector lever

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove an ashtray and turn out two screws.
3. Disconnect the socket of illumination of the lighter and remove forward section of the central console.
4. Remove a box for storage of small subjects.
5. Turn out two bolts and four screws and remove the central console.
6. Move the selector lever to a position P.
7. Turn out two bolts of fastening of a cover of a cable of the selector.
8. Turn out nuts of fastening of a cable of the selector.
9. Disconnect the socket.
10. Turn out four nuts of fastening of a basic plate of the selector and remove the selector lever assembled.

Installation

PERFORMANCE ORDER
1. Establish the lever of the selector and fix a basic plate of the selector four nuts.

Inhaling moment: 15,7–22,6 N • m

2. Connect two sockets.
3. Move the selector lever to a position P.
4. Establish a selector cable.
5. Screw and tighten nuts of fastening of a cable of the selector.

Inhaling moment: 7,8–10,8 N • m

6. Tighten bolts of fastening of a cover of a cable of the selector.

Inhaling moment: 7,8–10,8 N • m
7. Screw two bolts and four screws of fastening of the central console.
8. Establish a box for storage of small subjects.
9. Establish forward section of the central console and connect the socket of illumination of the lighter.
10. Screw two screws and establish an ashtray.
11. Connect a wire to the negative plug of the storage battery.
12. Check correctness of operation of the lever of the selector.