Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
- 10. Automatic transmission
   10.1. Check of work and adjustment of position of the lever of the selector
   10.2. Check of level and liquid replacement in an automatic transmission
   10.3. Procedure of replacement of liquid in the converter of an automatic transmission
   10.4. Leakages of liquid from an automatic transmission
   10.5. Replacement of oil sealing rings
   10.6. Block of valves of management
   10.7. Radiator of cooling of liquid of an automatic transmission
   10.8. Removal and installation of an automatic transmission
   10.9. Repair of an automatic transmission
   10.10. Oil pump
   10.11. The case of the regulating valve
   10.12. O/D switch
   10.13. Switch of a range of a transmission
   10.14. Sensor of temperature of an automatic transmission
   10.15. The sensor of frequency of rotation on entrances / turbines
   10.16. Sensor of speed
   10.17. Electromagnetic valves
   10.18. Linear electromagnetic valve
   10.19. Selector lever
   10.20. Repair of the lever of the selector
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

10.14. Sensor of temperature of an automatic transmission

Resistance check
PERFORMANCE ORDER
1. Remove the case of the air filter.
2. Connect an ohmmeter between C145 socket plugs 5 and 8.
3. Measure resistance when heating transmission (at car movement).

4. Check that resistance decreases according to the mentioned below table.

Temperature of a transmission, °C
Resistance, kiloohm
– 20
146,67-198,12
0
56,757-70,225
20
24,461-29,205
40
11,536-13,352
60
5,8719-6,6124
80
3,1902-3,5064
100
1,8336-1,9721
120
1,1068-1,1674
140
0,69439-0,72580
5. Otherwise, replace liquid in a transmission, the temperature sensor, the socket and connecting wires as assembly.
6. Establish the case of the air filter.