Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
- 8. Coupling
   8.1. Specifications
   8.2. Pumping of hydraulic system of a drive of coupling
   8.3. Adjustment of a pedal of coupling
   8.4. Coupling pedal
   8.5. Main cylinder of coupling
   8.6. Working cylinder of coupling
   8.7. Coupling disk
   8.8. Check of the bearing of switching off of coupling
   8.9. Check of a casing of coupling with a press disk
   8.10. Check of a disk of coupling
   8.11. Check of the central bearing
   8.12. Flywheel check
   8.13. Repair of the main cylinder of coupling
   8.14. Repair of the working cylinder of coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13

8.7. Coupling disk

GENERAL INFORMATION

Prevention

Remove the cylinder of switching off of coupling with the connected hydraulic tube. Needlessly do not remove the central bearing.


Coupling disk

1–working cylinder of coupling;
2–transmission case;
3–protective cover;
4–bearing of switching off of coupling;
5–fork of switching off of coupling;
6–casing of coupling and press disk;
7–coupling disk;
8–central bearing;
9–flywheel

Removal

PERFORMANCE ORDER
1. Remove a transmission.
2. Establish the special tool ОК590 111 004 for flywheel blocking from a provorachivaniye and an opravka ОК130 430 010 for a centering of a disk of coupling.
3. Gradually on a diagonal weaken bolts of fastening of coupling assembled, turning each bolt on 1/2 turns until it will be terminated a diafragmenny spring, and bolts can be unscrewed manually. Remove a casing of coupling with a press disk and a coupling disk.
4. If necessary, the special tool ОК401 111 012 take the central bearing.

Prevention

It is desirable to remove a flywheel and to check a back sealing ring of a cranked shaft on absence of leaks. If necessary, replace a sealing ring.


5. By the indicator of hour type measure flywheel palpation. If palpation exceeds admissible value, replace a flywheel.

Palpation: 0,2 mm

6. Establish the special tool ОК590 111 004 for flywheel blocking from a provorachivaniye, turn out six bolts and remove a flywheel.