Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
- 17. Central air
   17.1. Specifications
   17.2. Check of the relay of the compressor of the conditioner
   17.3. Check of the switch of the conditioner
   17.4. Check of thermocontact of the conditioner
   17.5. Fan / evaporator
   17.6. Check of the engine of the fan
   17.7. Check of the block of resistors of the engine of the fan
   17.8. Conditioner compressor
   17.9. Check of the switch of the fan
   17.10. Belt of a drive of the compressor of the conditioner
   17.11. Kondensor
   17.12. Kondensor fan
   17.13. Check of the relay of the fan of a kondensor
   17.14. Heater block
   17.15. Control unit heating and ventilation
+ 18. Electric equipment


a7a4cf13


17.15. Control unit heating and ventilation

Removal

PERFORMANCE ORDER
1. Disconnect a wire from the negative plug of the storage battery.
2. Remove the top decorative overlay of the dashboard.
3. Turn out four screws.
4. Extend the control unit heating and ventilation from a nest.
5. Disconnect the electric socket from a back part of the control unit heating and ventilation.
6. Turn out two screws and remove a ware box.
7. Release clips and disconnect a cable of management in temperature and a control cable from the heater block.
8. Remove the control unit heating and ventilation.

Installation

PERFORMANCE ORDER
1. Control unit installation by heating and ventilation is carried out to sequences, return to removal.
2. Connect a wire to the negative plug of the storage battery.