Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
- 17. Central air
   17.1. Specifications
   17.2. Check of the relay of the compressor of the conditioner
   17.3. Check of the switch of the conditioner
   17.4. Check of thermocontact of the conditioner
   17.5. Fan / evaporator
   17.6. Check of the engine of the fan
   17.7. Check of the block of resistors of the engine of the fan
   17.8. Conditioner compressor
   17.9. Check of the switch of the fan
   17.10. Belt of a drive of the compressor of the conditioner
   17.11. Kondensor
   17.12. Kondensor fan
   17.13. Check of the relay of the fan of a kondensor
   17.14. Heater block
   17.15. Control unit heating and ventilation
+ 18. Electric equipment


a7a4cf13


17.14. Heater block

Removal

PERFORMANCE ORDER
1. Merge cooling liquid from cooling system.
2. Remove the dashboard.
3. Release a clip and disconnect a management cable.
4. Disconnect heater hoses from the heater block.
5. Remove the heater block

Installation

PERFORMANCE ORDER
Installation of the block of a heater is carried out to sequences, return to removal.

Prevention

Before installation of sealing rings, oil them;

Do not grease connecting nuts of unions of the compressor of the conditioner;

At installation of the new fan or the evaporator fill in 50 cm3 of fresh oil for the compressor through a tube of a high pressure of the compressor.