Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
- 17. Central air
   17.1. Specifications
   17.2. Check of the relay of the compressor of the conditioner
   17.3. Check of the switch of the conditioner
   17.4. Check of thermocontact of the conditioner
   17.5. Fan / evaporator
   17.6. Check of the engine of the fan
   17.7. Check of the block of resistors of the engine of the fan
   17.8. Conditioner compressor
   17.9. Check of the switch of the fan
   17.10. Belt of a drive of the compressor of the conditioner
   17.11. Kondensor
   17.12. Kondensor fan
   17.13. Check of the relay of the fan of a kondensor
   17.14. Heater block
   17.15. Control unit heating and ventilation
+ 18. Electric equipment


a7a4cf13


17.10. Belt of a drive of the compressor of the conditioner

PERFORMANCE ORDER
1. On cars with the amplifier of a steering remove a drive belt as follows:
   – weaken A bolt;
   – weaken nuts of C;
   – weaken B nuts;
   – weaken a bolt of D;
   – remove a drive belt.
2. On cars without the amplifier of a steering remove a drive belt as follows:
   – weaken A nuts;
   – weaken B bolt;
   – remove a drive belt.
3. On cars with the amplifier of a steering adjust a tension of a belt of a drive as follows:
   – weaken a bolt And and nuts of B and C;
   – rotating an adjusting bolt, achieve a demanded tension of a belt. Check a belt tension, having pressed on it effort of 98 N (10 kg) in a place located on identical removal from pulleys and measure a belt deflection;
   – tighten a bolt And and nuts of B and C.
Deflection of a belt of a drive of the compressor of the conditioner:
   The new: 8–9 mm
   Being in the use: 9–10 mm
Inhaling moment:
   Bolt And: 37–53 N • m
   Nut In: 19–25 N • m
   Nut With: 32–46 N • m
4. On cars without the amplifier of a steering adjust a tension of a belt of a drive as follows:
   – weaken A nuts;
   – rotating an adjusting bolt In, achieve a demanded tension of a belt. Check a belt tension, having pressed on it effort of 98 N (10 kg) in a place located on identical removal from pulleys and measure a belt deflection;
   – tighten A nuts.
Deflection of a belt of a drive of the compressor of the conditioner:
   The new: 8–9 mm
   Being in the use: 9–10 mm
Moment of an inhaling of a nut And: 31–34 N • m