Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
- 16. Body
   16.1. Specifications
   16.2. Front bumper
   16.3. Rear bumper
   16.4. Forward door
   16.5. Vlagozashchitnoye door consolidation
   16.6. Hinges of a door and shock plate of the lock of a door
   16.7. Door lock
   16.8. Internal handle of opening of a door
   16.9. External handle of a door
   16.10. Cylinder of the lock of a door
   16.11. Switches of window regulators
   16.12. A window regulator with an electric drive
   16.13. Door glass
   16.14. Back door
   16.15. Headlight
   16.16. Top stoplight
   16.17. The back combined lamp
   16.18. Ceiling
   16.19. Cowl
   16.20. Sound signal
   16.21. Combination of devices
   16.22. Repair of a combination of devices
   16.23. Replacement of filament lamps of a combination of devices
   16.24. Printed-circuit board
   16.25. Top decorative overlay of the dashboard
   16.26. Switches
   16.27. Central panel
   16.28. Overlay of the central console
   16.29. Central console
   16.30. Regulator of illumination of the dashboard
   16.31. Left and right lattices of a heater of a windscreen
   16.32. Left and right lateral lattices of a heater
   16.33. Air lines of system of heating and ventilation
   16.34. Floor air lines
   16.35. Ware box
   16.36. Cable of opening of the lock of a cowl
   16.37. Handle of opening of the lock of a cowl
   16.38. Dashboard
   16.39. Control panel heating and ventilation
   16.40. External rear-view mirror
   16.41. Replacement of glass of an external rear-view mirror
   16.42. Forward seats
   16.43. Upholstery of a back of a forward seat
   16.44. Upholstery of a pillow of a forward seat
   16.45. The leaning-back hinge of a forward seat
   16.46. Back sitting
   16.47. Seat belts
   16.48. Clamp of a forward seat
   16.49. Forward humeral seat belt
   16.50. Seat belts of a back seat
   16.51. Bracket of fastening of a back seat belt
   16.52. Humeral back seat belt
   16.53. Top furnish of a forward rack
   16.54. Bottom furnish of the central rack
   16.55. Top furnish of the central rack
   16.56. Furnish of a back rack
   16.57. Support furnish for a foot
   16.58. Upholstery of a forward door
   16.59. Upholstery of a back door
   16.60. Trunk lid
   16.61. Trunk lid hinge
   16.62. Hoses of a washer of a windscreen
   16.63. Engine of a washer of a windscreen
   16.64. Screen wiper lever
   16.65. Sprays
   16.66. Replacement of brushes of a screen wiper
   16.67. Drafts of a screen wiper
   16.68. Screen wiper engine
   16.69. Distances between body points
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


16.38. Dashboard

GENERAL INFORMATION


1–overlay of the central console;
2–central console;
3–lateral cover;
4–bottom panel of furnish;
5–top decorative overlay of the dashboard;
6–combination of devices;
7–control panel heating and ventilation;
8–radio receiver;
9–ware box;
10-central panel of furnish;
11-dashboard set of switches and control devices

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Remove a safety cushion of the driver.
3. Remove a steering wheel, the switch of a signal of turn, both the top and bottom casings of a steering column.
4. Turn out a nut of fastening and release a cover of a cable of opening of the lock of a cowl from a plate on the left side of the dashboard.
5. Remove the handle of opening of the lock of a cowl. Turn out three screws and remove the furnish panel on the left side of the dashboard.
6. Turn out two bolts of fastening of the left side T-shaped............
7. Turn out two bolts of fastening of the left side of the dashboard, as is shown in drawing.
8. Remove an ashtray.
9. Remove an overlay of the central console.
10. Remove the control panel heating and ventilation.
11. Remove a ware box.
12. Remove the central panel of furnish.
13. Remove a safety cushion of the forward passenger.
14. Turn out two bolts of fastening of the right side T-shaped............
15. Turn out two bolts of fastening of the right side of the dashboard, as is shown in drawing.
16. Turn out two bolts from both parties of a steering column which fix a steering column and the dashboard. Lower a steering column down.
17. Disconnect all sockets connecting the dashboard and a plait of wires of the car.
18. Remove the dashboard.

Installation

PERFORMANCE ORDER
1. Establish the dashboard in the car.
Be convinced that the steering column is established correctly through T-shaped with a plait of wires before dashboard installation. Otherwise the steering column cannot be correctly established.
2. Connect sockets of a plait of wires and the dashboard.
3. Screw two bolts from both parties of a steering column which fix a steering column and the dashboard.
      
Inhaling moment: 18–26 N • m
4. Screw three bolts of fastening of the right side of the dashboard.
      
Inhaling moment: 18–26 N • m
5. Screw two bolts of fastening of the right side T-shaped............
      
Inhaling moment: 18–26 N • m
6. Establish and fix a safety cushion of the forward passenger.
      
Inhaling moment: 18–26 N • m
7. Establish the central panel of furnish.
8. Establish a ware box.
9. Establish the control panel heating and ventilation.
10. Establish an overlay of the central console.
11. Establish an ashtray.
12. Screw two bolts of fastening of the left side of the dashboard.
      
Inhaling moment: 18–26 N • m
13. Screw two bolts of fastening of the left side T-shaped............
      
Inhaling moment: 18–26 N • m
14. Establish the bottom panel of furnish on the left side of the dashboard.
15. Establish T-shaped and fix two bolts.
16. A nut fix a cover of a cable of opening of the lock of a cowl to the dashboard.
17. Establish the handle of opening of the lock of a cowl.
18. Establish a steering wheel, the switch of a signal of turn, both the top and bottom casings of a steering column.
19. Establish a safety cushion of the driver.
20. Establish the central console.
21. Connect a wire to the negative plug of the storage battery.