Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
- 12. Steering
   12.1. Specifications
   12.2. Steering check without the amplifier
   12.3. Steering check with the hydraulic amplifier
   12.4. Belt of a drive of the pump of the amplifier of a steering
   12.5. Replacement of a protective cover of steering draft
   12.6. Steering shaft
   12.7. Steering transfer
   12.8. Pump of the amplifier of a steering
   12.9. Repair of a steering shaft
   12.10. Repair of steering transfer
   12.11. Repair of the pump of the amplifier of a steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


12.9. Repair of a steering shaft

GENERAL INFORMATION

Steering shaft

1–lock of a steering wheel;
2–universal hinge;
3–steering shaft assembled;
4–intermediate shaft;
5–coupling bolts

Dismantling


PERFORMANCE ORDER
1. Reliably fix the lock of a steering wheel, then a chisel and a hammer make deepening (a groove for a screw-driver) in heads of two bolts of fastening of bolts of the lock of a steering column.

Prevention

Fix a steering column in a vice which sponges close brass or a fabric.


2. Fix a steering column in a vice and, a screw-driver, turn out bolts of fastening of the lock.
3. Remove the lock from a steering column.
4. Turn out two coupling bolts of the universal hinge of the connencting steering and intermediate shaft.
5. Remove an intermediate shaft.

Check

PERFORMANCE ORDER
1. Check lack of wear of the plug of a steering column and люфта connections of the universal hinge, and also smoothness of its movings and absence of noise, thus.
2. Be convinced that the steering shaft does not turn in the provision of a key of LOCK, and freely turns in any other situation.

Assembly

PERFORMANCE ORDER

1. Establish a coupling bolt of an intermediate shaft.

Inhaling moment: 18-26H • m

2. Establish the universal hinge on a shaft of a steering column and an intermediate shaft, and then tighten two coupling bolts of fastening of the universal hinge.

Inhaling moment: 18-26H • m

3. Put the lock of a steering column. Screw new bolts of fastening of the lock of a steering column, and tighten them while heads of bolts will not be cut off.