Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
- 12. Steering
   12.1. Specifications
   12.2. Steering check without the amplifier
   12.3. Steering check with the hydraulic amplifier
   12.4. Belt of a drive of the pump of the amplifier of a steering
   12.5. Replacement of a protective cover of steering draft
   12.6. Steering shaft
   12.7. Steering transfer
   12.8. Pump of the amplifier of a steering
   12.9. Repair of a steering shaft
   12.10. Repair of steering transfer
   12.11. Repair of the pump of the amplifier of a steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


12.8. Pump of the amplifier of a steering

GENERAL INFORMATION

Pump of the amplifier of a steering

1–sharnirny bolt;
2–lock-nut;
3–nuts of fastening of an arm;
4–adjusting bolt;
5–belt of a drive of the pump;
6–pressure head hose;
7–returnable hose;
8–bolts of fastening of an arm;
9–pump of the amplifier of a steering

Removal

PERFORMANCE ORDER
1. Turn out a sharnirny bolt of fastening of the pump of the amplifier of a steering.
2. Turn out a lock-nut of fastening of the pump of the amplifier of a steering.
3. Turn out nuts of fastening of an arm of the pump of the amplifier of a steering.
4. Remove a belt of a drive of the pump.
5. Turn out nuts and disconnect a pressure head hose from the pump.
6. Release a clip and disconnect soaking-up filter.
7. Turn out three bolts of fastening of an arm of the pump of the amplifier of a steering.
8. Remove the pump of the amplifier of a steering.

Installation

PERFORMANCE ORDER
1. Establish the pump of the amplifier of a steering.
2. Tighten three bolts of fastening of an arm of the pump of the amplifier of a steering.

Inhaling moment: 37–52 N • m

3. Establish soaking-up filter on the pump.
4. Connect to the pump a pressure head hose and fix it a bolt.

Inhaling moment: 44–54 N • m

5. Establish a belt of a drive of the pump.
6. Tighten nuts of fastening of an arm.

Inhaling moment: 37-52H • m

7. Tighten a lock-nut and a bolt.

Inhaling moment: 37-52H • m

8. Tighten a sharnirny bolt.

Inhaling moment: 37-52H • m