Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation



KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
+ 11. Axes and power shafts
- 12. Steering
   12.1. Specifications
   12.2. Steering check without the amplifier
   12.3. Steering check with the hydraulic amplifier
   12.4. Belt of a drive of the pump of the amplifier of a steering
   12.5. Replacement of a protective cover of steering draft
   12.6. Steering shaft
   12.7. Steering transfer
   12.8. Pump of the amplifier of a steering
   12.9. Repair of a steering shaft
   12.10. Repair of steering transfer
   12.11. Repair of the pump of the amplifier of a steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment


a7a4cf13


12.4. Belt of a drive of the pump of the amplifier of a steering

Check

PERFORMANCE ORDER
1. Check a belt of a drive of the pump of the amplifier of a steering on lack of cracks, wear and development. If necessary, replace a belt.
2. By the special adaptation measure a belt tension.

Tension of a belt of a drive of the pump of the amplifier of a steering and conditioner compressor:
New belt: 491–589 N
Belt which was in use: 422–497 N

3. In the absence of the special device, check a belt tension, having pressed on it effort of 98 N (10 kg) in a place located on identical removal from pulleys and measure a belt deflection.

Deflection of a belt of a drive of the generator
New 8–9 mm
9–10 mm which were in the use

Tension

PERFORMANCE ORDER
1. Weaken a sharnirny bolt And, a lock-nut In and nuts of fastening of an arm. Rotating an adjusting bolt, adjust a belt tension.

Inhaling moment:
Bolt And: 37–52 N • m
Nut In: 37–52 N • m
Nut With: 37–52 N • m

Replacement

PERFORMANCE ORDER
1. Weaken a sharnirny bolt And, a lock-nut In and nuts of fastening of an arm.
2. Rotating an adjusting bolt, weaken a belt tension.
3. Remove a belt.
4. To establish a new belt, and adjust a belt tension.