Kia Sephia/Shuma/Spectra

since 1995 of release

Repair and car operation

KIA of Sefia / Noise/range
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Power supply system and release
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Mechanical transmission
+ 10. Automatic transmission
- 11. Axes and power shafts
   11.1. Specifications
   11.2. Check люфта bearings of forward wheels
   11.3. Check of a condition of a power shaft
   11.4. Rotary fist and nave of a forward wheel
   11.5. Back axis
   11.6. Power shaft
   11.7. Repair of a rotary fist
   11.8. Type CV JOINT Tripoid
+ 12. Steering
+ 13. Wheels and tires
+ 14. Brake system
+ 15. Suspension bracket
+ 16. Body
+ 17. Central air
+ 18. Electric equipment

11.2. Check люфта bearings of forward wheels

PERFORMANCE ORDER

1. Lift the car and fix on support.
2. Turn out four nuts of fastening of a wheel.
3. Remove a wheel.
4. Unbend a fillet and unscrew a nut of fastening of a power shaft to a nave and turn out two bolts of fastening of a brake disk.
5. Remove a support and a brake disk.
	6. Establish a measuring tip of the indicator of hour type on an end face of a nave of a forward wheel and, moving a nave along an axis, measure люфт the bearing. Maximum permissible люфт: 0,05 mm
7. Establish a support and a brake disk.
8. Tighten a nut with a fillet of fastening of a power shaft and two bolts of fastening of a brake disk. Inhaling moment: Nut with a fillet: 210-279 N • m Bolts: 9,8–15 N • m
9. Establish a wheel.
10. Tighten nuts of fastening of a wheel. Inhaling moment: 88–118 N • m
11. Lower the car.